Included with the basic kit is the following:

• Garduino protoshield with all components:
  • Printed Circuit Board (PCB) for all inter-shield connections
  • Male header pins to connect PCB to Arduino
  • Photocell, to sense light
  • Galvanized nails, to sense soil moisture
  • Thermistor, to sense temperature
  • 1 LED
  • 3 10k-ohm resistors
  • 1 220-ohm resistor
  • 3 terminal board connectors
  • 2 Omron G5LE-1 relays
  • 2 diodes
• Altoids-style shipping / project case
• A small quantity of swiss chard (a good starter plant) seeds

The deluxe kit is the same as the basic but also includes:

• A 6" planter as the main shipping package (instead of the Altoids-style tin; less waste!)
• 2 extension cords (to be controlled by the relays)
• ~8' of 1/4" plastic irrigation tubing
• A submersible mini pump, rated at 66 gallons per hour

This ships in a 20-gallon tote that you reuse as the outer container for 6 plants and includes:

• everything from the deluxe kit, assembled
• 24-inch fluorescent fixture with one plant bulb
• Arduino Duemanilove with USB and power cables
• 6 milk cartons, cut to work as planters